Startechcom ICUSB2328 Bedienungsanleitung PDF herunterladen (Seite 5)

Instruction Manual

Installation

1. Insert the Driver CD that was included with ICUSB2328 into the CD/DVD-ROM drive

on the host computer.

2. ConnecttheType-BendoftheUSBcableusedinstep1totheUSBtype‘B’porton

the rear panel of ICUSB2324.

3. Connectthetype‘A’endoftheUSBcableintoanavailableUSBportonthehost

computer, or an available USB port on a USB hub.

4. Optional: Connect a 5V DC power adapter to the power port on the rear panel of

ICUSB2324, if the serial devices that will be connected require more power than the

USB bus on the host computer can support.

5. Connect the 8-to-1 breakout cable (included) to the port provided on the front of

the adapter.

Driver Installation

1. Once ICUSB2328 has been connected to the host computer, the operating system

will detect the connection and automatically launch the Add New Hardware Wizard.

When the Wizard appears, click Next.

2. At the next screen, select Search for the best driver for your device, and click Next.

3. Select Specify a location and browse to the

folder that corresponds to the operating

system that is installed on the host computer,

where E:\ is the designated CD/DVD-ROM drive.

Windows XP, 2000, 2003 users:

E:\USB_to_IO\FTDI\Win2000_XP_2003

4. Click Next. Windows will begin copying the necessary les.

5. Click Finish when prompted, to complete the driver installation.

6. After installing the drivers, Windows will detect the new COM ports and begin to

initialize them.Your new COM ports, numbered sequentially following the existing

ports in your system, are now ready.

ICUSB2328 Rear Panel

USB Type

1 2 3 4 5 6 7 8

Keine Kommentare

Startechcom ICUSB2328 Bedienungsanleitung Seite 5